Home
Block Bearings
Chain Guide
Bar Snap/Rails/Angle
Wear Strips
Tape
Corner & Straight track
Gear Rack
Plastic Chain
Mill Sprockets
Water Treatment
Custom
Sheet/Rod/Tube
Contact
Gears

CNC Polymers makes spur gears on a made-to-order basis. Gears from 1" up to 24" diameter can be machined to your specifications. Lead time is normally about a week. We can finish bores and provide keyways and other details to your specifications.

Gear Rack

Nylon Gear Rack is an excellent alternative for light-duty applications. The gear racks provide noise reduction and are corrosive resistant. They are available in 14-1/2 and 20 degree pitch angles. Standard length is 4 feet long. Must specifiy if matched ends are required.

Gear Racks 14-1/2 Degree

Part Number Diametral Pitch Face Width Overall Thickness Pitch Line Backing
GR1403 3 3 1-1/2 1.167
GR1404 4 2 2 1.750
GR1405 5 1-3/4 1-1/2 1.300
GR1406 6 1-1/2 1-1/2 1.333
GR1408 8 1-1/4 1-1/4 1.125
GR1410 10 1 1 .900
GR1412 12 3/4 3/4 .667
GR1416 16 1/2 1/2 .438
GR1420 20 3/8 3/8 .325

Gear Racks 20 Degree PA

Part Number Diametral Pitch Face Width Overal Thickness Pitch Line Backing
GR2003 3 3 1-1/2 1.167
GR2004 4 2 2 1.750
GR2005 5 1-3/4 1-1/2 1.300
GR2006 6 1-1/2 1-1/2 1.333
GR2008 8 1-1/4 1-1/4 1.125
GR2010 10 1 1 .90
GR2012 12 3/4 3/4 .667
GR2016 16 1/2 1/2 .438
GR2020 20 3/8 3/8 .325